Greases

These greases are used predominantly on bearings and shafts.

They provide a excellent range of properties such as, longer equipment life, water resistance, rust protection, low-temperature performance and great pumpability.

All products below where applicable conform to the NSF H1 regulations.

Available to order

Poly-Plate EP-0, EP-2, EP-3.5

The high-performance benefits of these greases are so outstanding that we believe it will replace lithium complex as the benchmark, high-temperature industrial grease. This grease has an extremely long life, excellent water resistance and better low-temperature performance than lithium complex greases. It is also recommended for Sealed-for-Life and EMB applications.
DOWNLOADS
NSF H1
Item stocked

Poly-Guard FG-LT, FG-2

The ultimate in food machinery lubrication where high temperatures coupled with high bearing speeds and loads have caused premature wear to lubricated parts. Poly-Guard FG provides the highest level of antiwear performance in an NSF H1 grease, and incorporates Micronox technology. Poly-Guard FG-LT grade yields excellent performance in automated centralized lubrication systems. Excellent versatility and high-temperature performance make this a true plant-wide grease.
DOWNLOADS
NSF H1
Item stocked

Clear-Guard FG-2

This translucent grease was compounded with a special high-temperature polymer that will cling to metal surfaces under the most severe conditions. Water, salts, heat and chemicals will not affect performance, and it resists sling and channeling under high-speed or high-temperature conditions.
DOWNLOADS
NSF H1
Item stocked

Magna-Plate 8

This is a general-purpose NLGI #2 food-grade grease. It has excellent water resistance and lubrication qualities. Good oil bleed characteristics at low ambient temperatures make it ideal for small, high-speed bearings.
DOWNLOADS
NSF H1
Available to order

Magna-Plate 44-0, 44-1, 44-2

JAX Magna-Plate 44 series are high-performance food-grade greases formulated for broad use in all food and beverage processing environments. Enhanced antiwear protection and pumpability with low bleed and seperation characteristics make 44-0 and 44-1 ideal for all centralized greasing applications requiring food-grade greases. A high degree of water resistance, oxidation stability and antiwear protection allow this food-grade grease to perform in areas thought to be unacceptable for ordinary food-grade greases.
DOWNLOADS
NSF H1
Item stocked

Pyro-Plate TFS

JAX Pyro-Plate TFS is specially formulated to provide exceptional compatibility with EPDM seals while enhancing the performance and reliability of valves and fittings utilized in the beverage industry. JAX Pyro-Plate TFS combines synthetic silicone base fluids with a polytetrafluoroethylene (PTFE) grease thickener system to provide outstanding lubricating performance in a broad range of applications where seal/elastomer compatibility and wear protection are critical to equipment operation. JAX Pyro-Plate TFS meets the requirements of 21 CFR 178.3570 (lubricants with incidental food contact).
DOWNLOADS
NSF H1
Item stocked

Pyro-Plate PFP

JAX Pyro-Plate PFP is formulated using PFPE (perfluoropolyether) base oil with a PTFE (polytetrafluoroethylene) thickener system. PFPE-based greases are synonymous with long-term stability and thermal and oxidative resistance. Using a fluorinated thickener such as PTFE gives the grease temperature and chemical stabilities similar to that of the base oil, allowing it to be used in harsh, demanding conditions.
NSF H1 – FG-00, FG-LT, FG-2, FG-PM
Item stocked

Halo-Guard FG Series

This series of revolutionary food-grade grease is manufactured with proprietary antiwear chemistry that improves performance over all competitive CSC greases. A newly enhanced calcium sulfonate complex thickener provides exceptional mechanical stability, very high load-carrying (E.P.) ability and remarkable rust and corrosion control. In addition, JAX Halo-Guard FG has excellent water resistance and outstanding high-temperature performance abilities. This technology is combined with a new high viscosity, partial synthetic food-grade base fluid to make JAX Halo-Guard FG the most effective food-grade grease for heavily-loaded applications. This is a true high-performance, plant-wide food-grade grease.

Note: NZ (Non-Zinc) versions NZ-2 and NZ-LT available on request.
DOWNLOADS
NSF H1 100% Synthetic
Item stocked

Magna-Plate 22

Extreme Low Temperature this is a unique 100% synthetic grease formulated for freezers and other applications where temperatures can approach -50°F (-46°C) and lower. It possesses excellent wear and rust protection in an extremely pumpable grease.
DOWNLOADS
NSF H1 100% Synthetic
Item stocked

Oven-Ice FG 2

JAX Oven Ice FG-2 is a 100% PAO-based grease with an ingorganic thickener system for extreme high-temp and moderate low-temp conditions. Oven Ice FG-2 is crystal clear and meets the requirements of NSF H1 and FDA 21 CFR 178.3570.
DOWNLOADS
NSF H1 100% Synthetic – Food Plant Open Gears
Item stocked

Gear-Guard FG

This is a new technology food-grade open gear grease. It provides exceptional load-carrying properties and adheres 5 - 20 times longer than conventional open gear compounds. It also provides outstanding water resistance.
DOWNLOADS